The electrical contractor launch plan
Every step from deciding to opening, in the order it happens, shaped to your situation, with your own numbers beside it. About 45 steps in 8 phases, 22 of them specific to an electrical contractor. Free to read; ticking steps off and putting in your own numbers come with membership.
The plan45 steps
- 01Not started0/6Fold
Decide with the numbersa week or two
Before a dollar is spent. Most expensive mistakes happen here, and this phase costs nothing.
An electrical contractor sells skilled and parts from its trucks.
Typical for one unit is $400,000 to $1,100,000 a year; the owner keeps 12 to 20% of it before paying themselves. If that band does not cover what you need, that is the signal to pause and look again.
~50% survive 5 years. Roughly half of all new U.S. employer businesses are still operating after five years.
Twelve questions about your money, time, experience and temperament, scored. Then the 5 questions this business asks of its owner, about the hours and the work. Answer both before you spend a dollar.
Rule of thumb: buy an established shop with real recurring agreements and a retainable crew when you want cash flow and lower risk; build from one truck when capital is tight and you can ... Answer it in your situation above and the plan reshapes.
Customers, prices, rent, staff pay, what it costs to open. We filled in typical numbers; change what you know and everything on this page follows.
- 02Not started0/5Open
Plan the moneya week
What it costs to open, where the money comes from, and the cushion that keeps you alive until the business pays for itself.
An electrical contractor is capital-light to start compared with a fixed-location business: there is no , because the van is the shop.
The itemized cost to open9 lines
- Service vans (lease down payments & upfit): $19,500 to $36,000Three vans with shelving, spool racks and ladder racks; buying all three new costs about $130,000 to $175,000 instead of the lease down payments
- Meters, hand & power tools, conduit tools & ladders: $6,000 to $26,000Knockout sets and top-tier meters are the big swing
- Initial truck stock (wire, breakers, devices): $9,000 to $24,000Copper prices move, so price wire when you order
- Van wraps, logo & website: $7,000 to $31,000How the phone starts ringing
- Tablets, card readers, office setup, safety gear & uniforms: $4,300 to $11,300
- Licensing, bonding & setup fees: $750 to $5,000State electrical license, contractor bond, entity and contract setup
- Insurance (liability, commercial auto & workers’ comp): $3,000 to $10,000First premiums and deposits; proof of liability coverage is often required to license and to bid
- Launch marketing: $2,500 to $15,000Door hangers, yard signs and the first 60 days of local ads
- Initial working capital: $40,000 to $110,000Payroll, fuel, and float on receivables for the first 3 to 6 months; your plan computes your own figure
Costs start on day one; customers take months. Map the first twelve months of cash so the business does not run out of money while it is getting going.
The business has to earn your pay like any other bill. Set it in your numbers and watch the month it move.
How deals in this business are financed5 lines
- SBA 7(a) loan (Up to $5M · 10 yr (25 with real estate) · 85% guaranteed up to $150k, 75% above)The workhorse for buying an existing electrical contractor or funding a startup’s equipment and working capital.
- SBA 504 loan (Up to 25 yr · owner-occupied real estate & major equipment)For buying the shop and yard you work from, or heavy long-life equipment.
- Seller financing (Often 5-20% of price · 3-7 yr)Common when buying a contractor.
- Equipment & fleet financing (Secured by the vans & equipment)Lease or finance the vans and bigger tools, secured by the equipment itself, so cash stays free for payroll and wire.
- Customer financing (for your customers) (Via third-party lenders)Not for you, but worth offering: third-party financing on panel upgrades, EV chargers, generators and rewires lifts close rates on the big tickets.
Most new shops pair an with 10 to 20% of your own cash. Know the monthly payment before you look at a single space.
Before you shop. A lender tells you what they would fund, what they need from you (credit, your cash in, a plan with numbers), and a pre-qualification letter makes a landlord or a seller take you seriously.
- 03Not started0/4Open
Set up the companya day or two
A day of paperwork, and it has to come before the space: a lease, a loan application and every permit are in the company’s name.
Your state’s business name search, the trademark register, and the domain, before the name is on a sign, a van, or a lease.
A , an , and the S-corporation election each change what you keep and what you are exposed to. Compare them with the numbers, confirm with a CPA and an attorney, then file with your state.
After:The is free from the IRS in minutes once the company exists. The bank account needs both. Keep business money separate from day one.
After:Pick the accounting software and connect the bank account now, so every cost of opening is captured and the numbers you later are real.
- 04Not started0/4Open
The territory and the vehiclea week or two
An electrical contractor's "location" is its service territory and how efficiently trucks cover it.
What decides it for this business: dense, drive-time-efficient territory, older housing stock, homeowner, middle-to-high income base, access to licensed techs, reasonable lead costs.
Mobile businesses still answer to city rules: where the vehicle can be kept overnight, whether you can run the business from home, and what the state licenses.
The van or truck is the shop. Price it, outfit it, insure it, and brand it before the first job. The quotes go into the loan application.
Commercial auto for the vehicle, for the work. Customers and any lender will ask for the certificate.
- 05Not started0/2Open
Get the loanfour to eight weeks
Four to eight weeks with an SBA lender, longer if the file is incomplete. Everything else waits on this, so send a complete file.
Your plan with numbers (download it as a PDF from this page), the company’s papers, the vehicle and equipment quotes, your personal financial statement, and proof of the cash you put in.
The lender funds against the quotes and the insurance; the money goes to the vendors and the build.
After:
- 06Not started0/8Open
Permits and the vehicletwo to four weeks
Electrical work is licensed and inspected almost everywhere, because a bad connection starts fires.
Bind the policies you had quoted before a contractor, a vehicle or a customer is in play. Keep the certificates; the landlord, the lender and the city will ask.
After:With the money in hand: the vehicle, the , the branding, and the state inspection most cities require before it can work.
After:Register your or corporation and obtain a city or county operating license.
State registration to collect and remit tax on materials where your state taxes them.
The business usually registers as an electrical contractor with a licensed master electrician or contractor as its qualifier.
Many states and cities require a surety bond (California asks for $25,000) and proof of to license a contractor or pull permits.
coverage for every van in the fleet.
Many states require continuing education to renew a license, often tied to the National Electrical Code, which is updated every three years.
- 07Not started0/10Open
Set up to runduring the build
During the build, so the business runs from day one: the systems, the prices, the people and the routine.
Dispatch, scheduling, invoicing, and service-agreement tracking are the operational core; they drive utilization and recurring .
Google Local Services, reviews, and local SEO are the lead pipeline; managing cost per acquired job is a core profit lever.
Fast field payments and financing on big jobs lift close rates and size on replacements.
Tech pay, spiffs, and on-call premiums get complex; you need this the moment you have a crew.
Per-truck visibility and clean books are essential for managing the business and financing growth.
, workers' comp, and commercial auto for the fleet, non-negotiable for a licensed trade.
See the price the the business needs implies, then check it against what the market pays.
Daily: Dispatch and route trucks, handle inbound calls and emergencies,... Weekly: Review truck utilization and close rates, reconcile lead cost per... Monthly: Review per-truck , agreement penetration, marketing ROI, tech...
Opening, closing, the sale, the complaint, the cash. One page each. This is the manual a franchise would have sold you.
Free, and it is how most people will find you. Address, hours, photos and the menu or price list, live before opening day; then the sign, the soft opening and the first regulars.
- 08Not started0/6Open
Open and measurethe first ninety days
You own it. Now run it on the numbers.
Friends, neighbors and a short menu or list. Find the problems while the room is forgiving.
Enter the real numbers and see every cost line against the for this business.
Idle truck time; Rising lead cost; supply.
Wages are the start: , insurance, training time and the hours you stop billing. Register as an employer and carry workers’ comp before the first payday.
Growth consumes cash before it produces it. Find the rate your own cash funds before you push.
Electrical contractors sell steadily to owner-operators, SBA buyers and larger contractors adding a service arm, and recurring-revenue service shops also draw...